|
The Ladder Caddy
PRO step ladder tool storage unit
 The Ladder Caddy PRO™ is a universal fit, tool
storage unit designed to fit over the top of any
standard sized step ladder. With or without the
removable trays attached, the main body can be
set securely in place and removed with ease. The
three removable trays are interchangeable and
can be hung and removed at will, allowing a
single tray or the entire assembly to be removed
and set aside when not in use.
|
|
The Olympic
Game Kit™, Lawn and Pool Tournament System
The Olympic Game Kit™, Lawn and Pool Tournament
System is a system of interlocking mechanisms
assembled to both square and round foam “pool
noodles”, meant to be arranged into game
patterns for use in lawn and pool activities.
The patented snap fit features of the system’s
molded end caps allow for a multitude of
arrangements such as; obstacle courses, mazes,
retrieval and tag games, toss and target
contests. The strength of the snap lock union
allows for vertical support of the foam noodles,
sufficient enough to build non-load bearing
structures such as children’s play forts and
crawl-thru configurations.
|
|
Private
client Stretch Assistance Sling project
 The
stretch assistance sling is a device meant to
aid in stretching the muscles of the legs and
lower back, to be used by those with a limited
range of movement. The device consists of a base
which is tightly attached to the shoe via an
adjustable strap, and a removable “ladder” type
handle that allows the wearer/user to
incrementally increase the level of stretch. The
base has two attachment points for the handle;
one closer to the toe for stretching of the leg
muscles, one closer to the ankle for stretching
the back muscles. The base of the device has a
raised rubber pattern on both sides to prevent
slippage of the shoe, as well as to provide
traction on hard surfaces. The device is
ambidextrous and can easily be disassembled or
folded flat for storage or transit. |
|
The Schonstedt
Instrument XT
The GA92-XT is a highly specialized magnetic
locator used to find hidden fero-magnetic
materials. The market for this unit is the
underground utility locating service industry.
The unit was designed with the intent to be worn
in a holster on the user’s belt, with a compact
extendable/retractable action for use and carry.
The product was introduced to market in 2004 and
quickly became the company’s #1 selling
instrument. Since its introduction, a family of
products has followed all based off the original
design foundation.
 |
|
The Global Secure Safety BVS
(Body Ventilation System)
The BVS filter/blower unit was designed to
be used in conjunction with a perforated vest,
worn under body armor, to force filtered air
across a soldier’s body and cool him through
evaporative means. The unit is worn on a belt
and positioned at the small of the back. A high
pressure micro blower brings air in through a
screw-on, replaceable filter and pumps it into
an air plenum at the bottom of the soldier’s
vest. The unit uses a rechargeable battery and
specially designed circuitry to monitor air flow
and battery life. Global Secure Safety was
awarded a $2 million dollar military contract
for development and delivery of 2k units to
American troops in Iraq during the spring of
2006.
|
 |
|
Elmridge Protection Escape
Mask
The mask was designed from a soft silicone
with the intent to be folded up and vacuum foil
packed, the filters protected from the elements
until time of use. The mask comes with an
elastic, quick-adjust head harness for easy
donning in the event of an emergency, such as a
building evacuation or bio-hazard incident.
|
 |
|
The Babington UBIAC Burner
Controller
The controller was designed to take an existing
unit from solid-state circuitry to digital and
is used to control the functionality of an
atomizing fuel oil burner. The unit houses two
PCB’s, one controlling the power of the unit,
the other controlling the digital signals. The
electro-mechanical interface from the existing
unit was replaced with a touch pad membrane
panel, and a LCD read-out was added for easy
monitoring of the system functions.
|
 |
|
Private client Shower Head
project
The shower head project was a redesign of an
existing all plastic assembly. The new design
incorporated improvements such as all die cast
zinc components, interchangeable screw-in
diverter discs and a ball/socket radial
adjustment joint. |
 |
Recent Wildwood Projects
